About PiVi

This author has not yet filled in any details.
So far PiVi has created 1503 blog entries.

Cleaning and maintaining a complete set of metal flashings

Flashings do not require daily attention, but they should remain part of building inspections. Water, dust and installation damage affect their condition. For maintenance, it is best to start by identifying the material and the location of the soiling. Only then should cleaning or repair be selected. A single random product is not the solution for all surfaces and all details. The material specification is useful for care. Galvanised, aluzinc and coated steel sheets have different surface finishes. A coloured element may also belong to one of several coating variants. It is worth locating the delivery documents before choosing a product for a stubborn stain.

By |2026-11-15T03:03:55+01:002023-06-12|Building guide|Comments Off on Cleaning and maintaining a complete set of metal flashings

Roof insulation: which decisions come before installation?

First establish where the boundary of the heated part of the building should run, and only then choose the material. This guide sets out the sequence of decisions: insulating the roof slope or the ceiling, calculating thickness rather than guessing, a between-rafter or above-rafter layout, and protection against moisture. It also covers substrate preparation, fixings and details at the eaves, wall plate and service penetrations. Each of these choices involves different trade-offs, so leave design decisions to the designer and, before buying material, review the continuity of the insulation and the airtightness of the joints.

By |2026-11-14T19:21:17+01:002023-06-05|Building guide|Comments Off on Roof insulation: which decisions come before installation?

Laying tile-effect metal roofing sheets cut to length

The key decision for cut-to-size metal roofing tiles is whether the order dimensions come from an actual measurement of the roof slopes rather than the house outline alone. Readers should check the lengths, widths and diagonals, the positions of valleys, chimneys and roof windows, and how the covering length depends on eaves and ridge details. A project drawing may not be enough. These findings tie into the choice of profile and the product instructions, so design decisions are left to the designer.

By |2026-11-14T22:54:27+01:002023-05-30|Building guide|Comments Off on Laying tile-effect metal roofing sheets cut to length

Documenting termPIR WS: lambda and system requirements

The termPIR WS specification should describe more than the PIR core. Lambda changes with thickness, and the facing has a specific structure. Without this information, substituting the product may retain the material name but change characteristics that are important for the entire roof. termPIR WS consists of a PIR core and a double-sided vapour-permeable glass fleece facing. This is a different surface from a vapour-tight aluminium laminate. In the specification for the application described as PIR boards, clearly indicate the flat roof surface on which the board facing is to work together with the covering. The termPIR WS fleece must be linked to the layers and the fixing method of the adopted roof covering, and the adopted variant must be clearly marked in the documentation.

By |2026-11-16T00:51:56+01:002023-05-28|Building guide|Comments Off on Documenting termPIR WS: lambda and system requirements

How should you cut insulated panels without damaging the facings?

Insulated panels are cut with tools suited to the metal facings and the core. Edge heating must be limited, the component well supported and swarf removed quickly. An angle grinder with a grinding disc is not the right choice for this task. Before cutting, check the instructions for the chosen system and the finishing detail. A clean cut alone is not enough if the core is left exposed or the sheet's protection is damaged after the work. The facing is thin sheet protected against corrosion. High temperature and sparks can damage its protective layers. Metal particles left on the surface begin to corrode and leave marks on the paint. They are not always visible immediately after the work is finished.

By |2026-11-14T09:56:13+01:002023-05-28|Building guide|Comments Off on How should you cut insulated panels without damaging the facings?

How long does an insulated panel with mineral wool last and what shortens its service life?

The durability of an insulated panel with mineral wool is determined by the entire element. The facings, their protection, the bond with the core and the tightness of the joints all matter. There is no single number of years that applies to every hall. A dry warehouse performs differently from a building with high humidity or an aggressive atmosphere. Good choice of coating and regular inspections help avoid repairs that seemingly start from a minor scratch. Mineral wool is an important part of the panel, but the enclosure does not consist of insulation alone. Thin facings and the core work together to carry loads. Loss of adhesion, severe denting or corrosion of the sheet can impair the element's performance even when the insulating material is still in place.

By |2026-11-14T09:54:22+01:002023-05-24|Building guide|Comments Off on How long does an insulated panel with mineral wool last and what shortens its service life?

What are the advantages and limitations of insulated panels with a mineral wool core?

Insulated panels with a mineral wool core combine a finished facing with insulation and allow the building to be closed quickly. Their strong point is the available fire classifications. In selected systems, acoustic insulation is also advantageous. However, greater weight and the thickness needed to achieve a low U-value must be taken into account. Assessing the advantages only makes sense when comparing panels intended for the same wall or the same roof. One panel forms the external surface, the insulation and the internal facing. On a prepared structure, this reduces the number of separate operations. It is not necessary to lay each layer of the building envelope in sequence over the entire surface. However, prior adjustment of lengths and preparation of details are of great importance.

By |2026-11-14T09:54:28+01:002023-05-23|Building guide|Comments Off on What are the advantages and limitations of insulated panels with a mineral wool core?

Fence picket spacing: balancing an open appearance and privacy

The gaps between pickets are just as important as the profiles themselves. They reveal glimpses of the garden, change how the colour is perceived and affect how well the property is screened. Metal fence pickets set closely together can look like a solid surface. The same elements spaced more openly create a more open rhythm. However, there is no single gap that suits every house. The choice should follow from where the fence will be viewed, the need for privacy and the actual layout of the structure. It is worth checking several variants before ordering material. Ask what should be visible through the fence. At the entrance, contact with a visitor may matter. By the terrace, limiting visibility may be more important. Along a side boundary, a calm view of greenery is sometimes needed. These needs do not always lead to identical spacing across the whole property. Sections can be varied while keeping a common profile and colour.

By |2026-11-15T17:54:32+01:002023-05-20|Building guide|Comments Off on Fence picket spacing: balancing an open appearance and privacy

What do the properties of termPIR MAX 19 AL actually tell you?

The name MAX 19 draws attention to the thermal properties. However, the documentation for termPIR MAX 19 AL also contains mechanical data and reaction-to-fire conditions. Product selection requires reading them together, without assuming an automatic advantage in every category. termPIR MAX 19 AL is a board made of rigid PIR foam, protected on both sides with a gas-tight laminate of aluminium, paper and polyethylene. Its primary distinguishing feature is its level of thermal conduction. In the specification for the application described as PIR boards, clearly indicate the place where little space remains for insulation under the existing flashing. The cross-section at the existing flashing must be checked before using the advantage of the low lambda value, and the adopted variant must be clearly marked in the documentation.

By |2026-11-16T00:51:54+01:002023-05-18|Building guide|Comments Off on What do the properties of termPIR MAX 19 AL actually tell you?

Specifying Utherm Floor LE: data needed for floor construction

The Utherm Floor LE specification should state more than thickness and lambda. The design needs loads, the load-distributing layer and the rules for forming the edges. Data for another UNILIN board does not replace the documents specific to the product intended for the floor. Utherm Floor LE is a PIR board intended for floors. It has gas-tight laminate on both sides with a printed grid. The terms “polyurethane boards” and “polyurethane foam” are broader than the precise designation of the PIR product. In the description of the application of PIR boards, the limited floor level at the doors in the solution with Utherm Floor LE must be clearly indicated. The description of the function should allow the height of Floor LE, the substrate, the services and the finished covering to be added together.

By |2026-11-16T00:53:39+01:002023-05-17|Building guide|Comments Off on Specifying Utherm Floor LE: data needed for floor construction
Back to top