When is tile-effect metal roofing a good choice for a new or existing roof?

Blachodachówka is worth considering when its profile suits the roof pitch, the roof structure and the intended appearance of the house. Before comparing prices, however, check the manufacturer's documentation for the permitted slope, the required batten layout and the fixing method — these determine whether a given model is suitable for your roof at all. For a renovation, also assess the condition of the roof trusses, the old layers and any signs of damp, because a lightweight blachodachówka will not repair a weakened structure. Only then compare complete roofing variants rather than the price of a single sheet.

By |2026-11-14T16:09:05+01:002025-01-29|Building guide|Comments Off on When is tile-effect metal roofing a good choice for a new or existing roof?

Preparing roof battens for T18 and T35 trapezoidal sheets

The spacing of battens under trapezoidal sheeting is determined by the load capacity of the specific sheet and the roof loads, not by one universal module. It is therefore worth checking whether the chosen profile and its documentation match the support scheme, roof pitch and site conditions. Also consider the condition of the structure, the evenness of the supports and the layer arrangement. T18 and T35 require separate selection of thickness and fixings, and the designation alone is not enough. Below we discuss the choices facing the building owner and the contractor, and the trade-offs to consider before installation.

By |2026-11-14T22:53:22+01:002025-01-27|Building guide|Comments Off on Preparing roof battens for T18 and T35 trapezoidal sheets

What does the Polish term ‘płyta obornicka’ mean, and where are these panels used?

The name “płyta obornicka” is a colloquial term for a sandwich panel, so when choosing one you should first check the full product specification rather than the name alone. The order should state the building’s function, panel type, core type, thickness, required parameters, facings, coatings, colour, module and lengths, and include the layout of supports and openings. The name alone does not indicate the core type, thickness or whether the panel is for a wall or roof, so comparing offers requires reference to the data sheet and instructions for the specific product.

By |2026-11-14T16:06:31+01:002025-01-23|Building guide|Comments Off on What does the Polish term ‘płyta obornicka’ mean, and where are these panels used?

What makes up the cost of an insulated panel roof?

The cost of an insulated panel roof includes far more than the purchase of the panels. Flashings, fixings, seals, transport, unloading and installation must be added. Supports and openings in the roof slope also matter. A reliable comparison of quotes requires the same specification and the same scope of work. The price per square metre of panel does not equal the price per square metre of a finished, weathertight roof. First establish what the given amount covers. It may be the price of material, the covering with installation, or the entire roof including the structure. These are different scopes. Also check whether the figure is net or gross and what area was used for settlement. Compare short advertisements without a specification with particular caution.

By |2026-11-14T12:17:24+01:002025-01-21|Building guide|Comments Off on What makes up the cost of an insulated panel roof?

Six principles for improving the wind resistance of a roof

A roof's wind resistance depends above all on a coherent system of structure, battens, covering and fixings, not on the weight of the material alone. It is worth checking whether the design reflects the building's actual conditions rather than assumptions carried over from a similar property. Edges, corners and the locations of additional installations deserve particular attention, since the load distribution there may differ from that at the middle of the slope. The principles below organise the review of both the design and the finished roof, indicating what to examine when choosing a solution and during later use.

By |2026-11-15T03:02:20+01:002025-01-21|Building guide|Comments Off on Six principles for improving the wind resistance of a roof

Which practical skills should a roofing course teach?

A roofing course delivers most value when it lets participants practise installation details themselves rather than merely view a finished roof. Before enrolling, check the list of tasks you perform day to day and compare it with the programme: someone starting with modular metal tiles needs grounding in geometry and the sequence of laying modules, while a contractor working on large roofs with sandwich panels needs exercises in lifting elements, support tolerances and sealing joints. Matching the programme this way is a better indicator than a general slogan about modern roofing.

By |2026-11-14T16:07:39+01:002025-01-20|Building guide|Comments Off on Which practical skills should a roofing course teach?

Does every part of a steel building need the same temperature?

At the gate, unloading is under way; in the middle, an assembly team is working; and at the side, supplies are stored. These areas do not always need the same conditions. A steel hall can combine several temperature zones if the division follows from how the facility actually operates. Setting different values on the controllers alone is not enough when air circulates freely throughout the interior. First, it is worth marking the permanent workstations, storage and transfer areas on the floor plan. The hours of use and the requirements of the goods must be established. A steel hall may have an area that needs constant conditions and a part that is used only occasionally. However, the differences must remain consistent with the requirements for people, processes and materials.

By |2026-11-15T03:02:39+01:002025-01-15|Building guide|Comments Off on Does every part of a steel building need the same temperature?

Can insulated roof panels be used on a low-pitch roof?

Yes, sandwich panels can be laid on a low-slope roof, but only if the chosen system and its joint arrangement allow it. A flat roof does not mean a surface without slope – drainage must be ensured, deflections taken into account and laps correctly formed. Requirements may differ for continuous panels and those joined along their length, so a single general figure is not enough to select every covering. Before deciding, check that the enquiry clearly states percentage or angle, and whether it refers to the design dimension or the actual dimension after the structure is built.

By |2026-11-14T16:06:06+01:002025-01-13|Building guide|Comments Off on Can insulated roof panels be used on a low-pitch roof?

Planning the structure of a hipped roof

Before choosing the covering, establish how the building's shape and span will translate into the arrangement of common rafters, hip rafters and shorter elements at the ridges. Check where supports and bracing are needed, how drainage and ventilation should run, and how to insulate the corners without gaps. With a complex form including dormers, valleys and additional ridges appear, changing the sheet-metal cutting plan and the amount of labour. Give the contractor floor plans, sections and roof pitches so the quote separates structure, covering, insulation and flashings.

By |2026-11-14T22:53:40+01:002025-01-07|Building guide|Comments Off on Planning the structure of a hipped roof

Refurbishing a building with cold-formed steel sections: checks before replacing the cladding

Replacing panels or installing new equipment may look like a minor intervention. For the structure, however, it means a change in loads, supports or connections. Cold-formed profiles in an existing hall must be assessed in their actual condition. The fact of many years of trouble-free operation alone does not confirm suitability for the new task. Modernisation should begin with identifying the layout before new cladding is ordered. Old drawings are an important source, but they do not always show all the changes made. They should be compared with the building. Cross-sections, lengths, spacings and connections are important. It is also necessary to establish whether there are additional openings, suspended elements or parts not visible in the original design.

By |2026-11-15T17:50:39+01:002025-01-05|Building guide|Comments Off on Refurbishing a building with cold-formed steel sections: checks before replacing the cladding
Back to top