+48 500 409 109

When to specify made-to-length tile-effect roofing

Made-to-length tile-effect sheets can suit a simple roof slope where the layout produces few offcuts. Ask for a cutting plan for the entire roof, including valleys and dormers, before settling on a sheet length. Consider the route from the delivery vehicle to the roof. Where access for lifting is restricted, shorter sheets can be easier to handle even with the extra lap. To work out the quantity required, use the effective cover width and the lengths permitted for the particular profile.

By |2026-11-14T19:20:16+01:002026-10-17|Building guide|Comments Off on When to specify made-to-length tile-effect roofing
Read More

Made-to-length tile-effect roofing for a traditional house

Choosing cut standing-seam cladding for a traditional-style house requires assessing the whole roof slope, not a single piece of sheet. Check whether the rhythm of the waves and pressings harmonises with the building’s scale, window layout, chimney and eaves width. Compare the colour with existing façade materials, keeping the number of tones restrained. Sheet length is also a practical criterion: on simple slopes it can reduce cross-joints, but with dormers and valleys compare the cut format with the modular one. Before ordering, measure the roof and assess the condition of the roof structure.

By |2026-11-14T19:20:09+01:002026-10-16|Building guide|Comments Off on Made-to-length tile-effect roofing for a traditional house
Read More

Hiring a roofer: which jobs belong in the scope of work?

A roofer is responsible for the covering and details that help protect the building from water, and their work begins before the first sheet is screwed down. Before starting, it is worth checking that the roof matches the documentation and the instructions for the chosen covering, especially the pitch, diagonals, eaves line and plane of the battens. The contractor should report any discrepancies found, and in a renovation assess the available parts of the old roof; doubts about the load-bearing capacity of the truss require a structural engineer's assessment. The scope of the contract should clearly define the layers, flashings, ventilation and acceptance of works.

By |2026-11-14T16:06:57+01:002026-09-12|Building guide|Comments Off on Hiring a roofer: which jobs belong in the scope of work?
Read More

What distinguishes modern modular tile-effect metal roofing?

The choice of modular metal roofing tile depends above all on how its geometry fits the roof form, not on the pattern alone. Check how the waves, flat fields and transverse pressings read across a large roof area, and whether the profile proportions suit the eaves and façade. Assess a sample made up of several modules, not a single swatch. Also verify that the accessories and flashings match the chosen model, and that the documentation clearly describes the first row and the ridge termination. Only then compare the coating and technical parameters.

By |2026-11-14T16:08:26+01:002026-09-06|Building guide|Comments Off on What distinguishes modern modular tile-effect metal roofing?
Read More

Tile-effect metal roofing or clay tiles? How to compare cost and durability

Tile-effect metal roofing and clay tiles can both form a durable roof, but they require a different approach to structure, installation and cost. Metal sheet is considerably lighter. Clay consists of small, separate elements. A reliable comparison should cover the whole roof, not just a square metre of covering. The condition of the roof truss, the shape of the roof slopes, the accessories required and the requirements for appearance and use of the loft all matter. When replacing an old roof, the weight of the new material is one of the first parameters to check. Tile-effect metal roofing usually places less load on the truss than clay tiles. This does not mean, however, that every old structure is suitable for metal sheet. Rotten timber, weakened connections and excessive deflection require assessment regardless of the covering chosen.

By |2026-11-14T09:50:43+01:002026-07-30|Building guide|Comments Off on Tile-effect metal roofing or clay tiles? How to compare cost and durability
Read More

What makes a metal roof energy efficient?

The energy efficiency of a metal roof depends on the entire layer build-up, not on the covering alone. Before choosing materials, the building owner and contractor should establish where the thermal boundary runs — along the slope or at ceiling level — and then check insulation, airtightness and continuity of connections. It is worth comparing available solutions such as PIR boards, sandwich panels or structural trapezoidal sheets in terms of thickness, thermal bridges and ventilation. This article helps assess which parameters genuinely affect performance and which merely complement it.

By |2026-11-14T22:52:11+01:002026-07-28|Building guide|Comments Off on What makes a metal roof energy efficient?
Read More

Selecting a protective coating for T18 and T35 trapezoidal steel sheets

A T18 or T35 designation identifies the profile family of a trapezoidal steel sheet. It says nothing about how the steel is protected. Start with the building’s location and use, then check whether the specified finish is suitable for that exposure. Two sheets with much the same colour and texture can have different metallic and organic coatings. Ask the supplier to identify both coatings alongside the steel grade, core thickness and profile. With those details to hand, you can tell whether the prices cover equivalent sheets.

By |2026-11-15T03:10:43+01:002026-07-27|Building guide|Comments Off on Selecting a protective coating for T18 and T35 trapezoidal steel sheets
Read More

Choosing a patio roof that suits the house

A terrace roof must suit how the space will be used and how the house is built, not just the look of the covering. Before choosing, decide whether the terrace will stay open or the sides may be enclosed later, as this changes wind and moisture conditions. Check the fall, the wall junction and possible snow load from a higher roof slope. Compare T18, T35 and sandwich panels for the underside, daylight in rooms and drainage. Only a complete package with structure and flashings gives a basis for pricing.

By |2026-11-14T22:53:00+01:002026-07-27|Building guide|Comments Off on Choosing a patio roof that suits the house
Read More

Which building technologies can reduce costs on a modern project?

The choice of technology depends above all on matching the goal of a specific building, not on the novelty of the product itself. Check whether prefabrication, sandwich panels or the selected insulation actually solve the stated problem rather than adding cost. Before ordering, define the aim, such as a thinner roof or fewer wet trades, and compare options against the same requirements. Verify thermal parameters, span, fire properties and the method of installation. Often a greater change comes from better-prepared details than from an unfamiliar covering.

By |2026-11-14T16:08:20+01:002026-07-01|Building guide|Comments Off on Which building technologies can reduce costs on a modern project?
Read More

When does sheet metal make sense for a façade?

Metal cladding on a façade is worth considering if you want a durable and distinctive finish with low cladding weight. Before deciding, check that the design covers the supporting frame, drainage and connections, and that the cladding itself is not expected to replace wall insulation. Compare profiles and the way sheets are joined, as well as whether cladding could be used on just a selected part of the façade. Remember that the final selection is for the designer to make.

By |2026-11-14T19:21:21+01:002026-06-30|Building guide|Comments Off on When does sheet metal make sense for a façade?
Read More
Back to top