Choose a material

Roofing sheets

Sandwich panels

PIR insulation boards

XPS

Accessories

Fencing

Selecting a protective coating for T18 and T35 trapezoidal steel sheets

Trapezoidal steel sheet

In brief

A T18 or T35 designation identifies the profile family of a trapezoidal steel sheet. It says nothing about how the steel is protected. Start with the building’s location and use, then check whether the specified finish is suitable for that exposure. Two sheets with much the same colour and texture can have different metallic and organic coatings. Ask the supplier to identify both coatings alongside the steel grade, core thickness and profile. With those details to hand, you can tell whether the prices cover equivalent sheets.

Two trapezoidal sheet metal samples with different profile heights and graphite coating

T18 or T35 defines the profile, not the quality of the coating

The profile designation describes the family of sheet profiles. It does not state which steel was used or how its surface was protected. The same shape may be available in several thicknesses, coatings and colour versions. Each of these variants requires a full specification.

The offer should list separately: profile, core thickness, steel grade, metallic protection and organic coating. Dimensions and the intended use of the sheet should also be included. The entry “T35 graphite” alone does not provide enough data to compare two deliveries.

How do the protective layers work together?

The metallic layer provides protection for the steel. The organic coating adds surface protection and gives the sheet its appearance. They should not be equated, nor should their thicknesses be added to the declared core thickness without checking how the data is presented.

The parameters of the whole system matter more than a single impressive description. Paint thickness alone does not determine resistance. Its composition, adhesion, substrate and intended use also count. The same principle is worth applying when comparing matt and gloss finishes.

First assess the external conditions

A building near the sea, an industrial plant or a source of aggressive pollution requires a separate assessment. Humidity, salinity and deposited dirt matter. A material suitable in a calm residential environment does not have to be approved for every environment.

The supplier should be given the location and surroundings rather than simply being asked for the ‘best coating’. In more demanding conditions, confirmation of suitability for the specific project may be required. This should be kept together with the order and warranty documents.

Do not overlook what happens under the sheet

In an open-sided shelter, the underside of the covering is subject to different conditions than in a heated warehouse or an agricultural building. Moisture and vapours may affect the inner face of the sheet. It should be checked whether the protection used there matches the actual service conditions.

Anti-condensation fleece does not replace a resistant coating or a moisture-management design. It can temporarily take up condensate but needs conditions in which to dry out. In a heated building, the insulation and the limitation of water vapour ingress must still be properly resolved.

View trapezoidal steel sheets and get a free quote from SteelProfil

What do corrosion and UV resistance tell you?

The documentation may contain separate categories for corrosion resistance and UV resistance. They relate to different phenomena. Good colour durability is not the same as protection against corrosion. Both parameters should be compared for the exact variant selected.

The coating resistance category should not be directly equated with the corrosivity category of the environment either. The latter describes the service conditions. The combination of both pieces of information serves the selection of material. If data is missing, it is better to request a data sheet than to assess quality by trade name.

Assess colour and texture on a real sample

Matt, gloss and surface texture change how the roof is perceived in light. A sample should be viewed outdoors, next to the planned façade colour and flashings. An image on a screen does not show the shade faithfully. The same colour number may also look different in different coatings.

Technical parameters must not be derived from appearance alone. A rough surface does not automatically mean greater corrosion resistance, and gloss does not prove inferior quality. For one roof slope, a consistent material variant and method of compiling the delivery should be agreed.

Installation and cleaning must protect the chosen coating

Even well-selected protection can be damaged during unloading. Sheets must be carried without sliding over one another and cut with approved tools. Swarf is removed after work, before it begins to rust. The method of protecting cut edges follows the instructions.

After installation, inspections and cleaning with suitable agents are required. Accumulated deposits retain moisture. Aggressive solvent or a wire brush can destroy the protective layer. The care requirements should be reviewed before purchasing the sheet metal.

How do you compare cost and warranty terms?

First, compare identical steel thicknesses, lengths and units of area. Only then compare the surcharge for the coating. The price per m² of total and usable area describes different quantities of material. The quote should also cover the matching flashings, fasteners and touch-up paint.

In the warranty, check the scope of cover, the permitted environment and the maintenance obligations. The stated period is not a simple service-life forecast. A suitable T18 or T35 coating is one whose use can be confirmed for the building and maintained in accordance with the instructions.

7 branches. Materials closer to your project.

Izoprofil.eu map of seven branches offering sandwich panels, PIR boards and sheet metal
  • SEROCK — Dzierżenin 34 E [mapa]
  • BŁONIE — ul. Sochaczewska 138A [mapa]
  • RADOM — ul. Grobickiego 8 [mapa]
  • ŁÓDŹ — Natolin 8 [mapa]
  • OLSZTYN — Barczewo, ul. Prosta 9 [mapa]
  • WROCŁAW — ul. Jerzmanowska 10C [mapa]
  • GORZÓW WLKP. — ul. Zielona 33/34 [mapa]

Check prices and availability: +48 500 409 109

Free quote