+48 500 409 109

Which specifications should you compare when buying tile-effect metal roofing?

Before buying a metal roofing tile, compare the technical data of the specific variant, not just the profile name and price per metre. Check whether the offer describes the same product, how gross and effective metres are calculated, and what the steel and coating specifications say. Ask for documents confirming the application and establish whether the set includes roof details. Review the delivery, storage and warranty terms. This way, before accepting the material, you will know what is actually arriving on site and how to compare offers on a common basis.

By |2026-11-15T03:02:15+01:002023-03-31|Building guide|Comments Off on Which specifications should you compare when buying tile-effect metal roofing?
Read More

Checking the roof before the first autumn frost

Before the first frost, start by comparing the roof's current condition with photographs from a year ago and notes on earlier defects, then check that the entire drainage path is clear, not just the leaves visible at the gutter. The inspection should cover the covering, flashings, valleys, fixings and loft, while the scope of work on the slope depends on the weather and the roof's usage instructions. Record the result with defect locations and a repair plan so that priorities can be set before winter.

By |2026-11-15T03:01:30+01:002023-03-15|Building guide|Comments Off on Checking the roof before the first autumn frost
Read More

Clay tiles or tile-effect steel sheets for a house roof?

The choice between clay tiles and metal roofing depends mainly on the design, roof structure and budget. Check which material the documentation specifies and whether the local plan defines the roof's appearance. Compare the roof pitch with the requirements of the specific product, as neither clay nor metal has a single minimum angle for all models. Also analyse the weight of the whole system, how details are formed and the amount of waste for the given geometry. Leave decisions on layers and fixing to the designer, and compare two complete specifications before ordering.

By |2026-11-14T22:54:42+01:002023-03-13|Building guide|Comments Off on Clay tiles or tile-effect steel sheets for a house roof?
Read More

Selecting soffit sheets and estimating the cost of finishing the eaves

Choosing roofing sheet for a soffit starts with establishing whether the eaves require an air inlet, as this determines the layout of panels and openings. Also check the geometry of the structure, the exposed face of the sheet and how it will be fixed to the supporting frame. The cost of the finish covers more than the sheet area: trims, flashings, fixings, ventilation components and work at corners all count. Drawing out the strip layout helps limit waste and shows whether offcuts can be reused. Remember that a soffit will not repair a leaking eaves – water ingress must be resolved before installation.

By |2026-11-14T22:55:30+01:002023-03-07|Building guide|Comments Off on Selecting soffit sheets and estimating the cost of finishing the eaves
Read More

Tile-effect metal sheets or bitumen shingles: which suits your roof?

The choice between metal roofing tiles and bituminous shingles depends on the roof pitch, geometry and condition of the structure, not on the price of the outer layer alone. Before deciding, check whether the chosen material falls within the permitted slope range and whether the existing substrate needs preparation or replacement. Also compare the requirements for ventilation, detail flashings and subsequent maintenance. Remember that comfort and cost are determined by the entire layer build-up, not just the visible surface of the covering.

By |2026-11-14T16:07:37+01:002023-02-22|Building guide|Comments Off on Tile-effect metal sheets or bitumen shingles: which suits your roof?
Read More

How to choose a repair for a leaking metal roof

First establish whether water is actually penetrating the covering or is the result of condensation of water vapour beneath the metal sheet. That distinction determines the repair method, since tape and sealant will not fix every cause. Check the condition of the washers, the geometry of the laps, the flashings at the chimney and wall, and any corrosion of the sheets. Also assess the roof pitch and whether drainage is unobstructed. With sandwich panels, the core and the joint may matter. Only after locating the water path and assessing the substrate can a durable or temporary solution be chosen.

By |2026-11-14T19:21:14+01:002023-02-18|Building guide|Comments Off on How to choose a repair for a leaking metal roof
Read More

When do the advantages of a metal roof make a difference?

A metal roof can combine low weight, varied appearance and efficient coverage of large areas, but these benefits emerge only once the product is matched to the specific project. It is worth checking the load capacity and condition of the structure, the required pitch, the support spacing and how the loft will be used, and only then choosing the profile and coating. When replacing a covering, a lighter material may make it easier to find a suitable variant, yet it does not confirm that the old roof truss is sound. Assess the whole roof with its insulation, fixings and details, because the covering alone does not make it.

By |2026-11-14T16:09:27+01:002023-02-01|Building guide|Comments Off on When do the advantages of a metal roof make a difference?
Read More

Modular tile-effect sheets compared with other lightweight roof coverings

When choosing a lightweight roof covering, compare above all the format of the elements and the number of joints, as these determine how well the covering fits the roof. Check whether modular metal roof tiles suit your roof slope, details and installation method, not just the overall appearance. It is worth comparing the cutting layout, the time needed to make joints and the full cost with cut sheets and trapezoidal profiles. Remember that overall dimensions differ from the effective covering area, and individual models may have a different geometry.

By |2026-11-14T19:22:21+01:002023-01-24|Building guide|Comments Off on Modular tile-effect sheets compared with other lightweight roof coverings
Read More

Assessing stains on coated chimney flashings

A dark mark on a chimney flashing does not yet tell you what is happening to the sheet metal. It may be a deposit, soiling left after works, or a sign of surface damage. Before cleaning, it is worth identifying the source of the change. Chimney flashings work in a complex environment, so an arbitrary chemical agent is often a poor choice. The assessment must be combined with checking the joints and the path of water around the roof penetration. Check where the soiling appears and whether it recurs after cleaning. Its location can help distinguish run-off from the chimney surface from contamination left on the roof. However, final conclusions should not be drawn from the colour of the stain alone. An inspection of the location is needed.

By |2026-11-15T03:03:36+01:002023-01-19|Building guide|Comments Off on Assessing stains on coated chimney flashings
Read More

Choosing a new covering after an asbestos cement roof is removed

First establish whether the old sheets contain asbestos and plan their safe removal — only then choose the covering. The key variable is the condition of the roof structure, not just the weight or price of the new material. Check rafters, purlins, wall plates and connections, especially near chimneys and former leaks; do not judge the load-bearing capacity of the timber from a photograph. The colloquial term “eternit” is used for various sheets, so determine the covering’s composition from documentation and expert assessment. Before setting a date, ask your municipality about collection rules and possible support. Only after these steps should you compare trapezoidal sheet with modular metal tile.

By |2026-11-14T19:20:32+01:002023-01-11|Building guide|Comments Off on Choosing a new covering after an asbestos cement roof is removed
Read More
Back to top