Designing with Utherm Wall LE: specifying the wall construction precisely

The design description of Utherm Wall LE should clearly indicate the laminate variant and where it is used. Thermal parameters do not replace the fire or acoustic requirements for the wall. Separating the data in this way helps to verify the offer and the scope of any substitution. Utherm Wall LE is a PIR board with gas-tight laminate on both sides. The manufacturer describes it as a solution for cavity walls. The terms “polyurethane boards” and “polyurethane foam” are broader than the precise designation of the PIR product. In the description of the application of PIR boards, the intended use of Utherm Wall LE for the insulation layer of a cavity wall must be stated unambiguously. The description of function should make it possible to distinguish Wall LE with laminate from the product combined with a gypsum facing.

By |2026-11-16T00:53:43+01:002023-09-10|Building guide|Comments Off on Designing with Utherm Wall LE: specifying the wall construction precisely

Can a metal roof have concealed gutters?

Yes — concealed gutters can work with a metal roof, provided the whole drainage arrangement is included in the design of the eaves and façade. Before requesting a quote, establish what exactly is to be concealed: the gutter, the brackets, the fascia cover or the downpipe, since these solutions have different requirements. Ask for a cross-section of the proposed detail showing the gutter, flashings, insulation and water path. Also check capacity, access for cleaning and how water is discharged if the system becomes blocked — an aesthetic detail should still allow safe maintenance.

By |2026-11-14T16:08:43+01:002023-09-07|Building guide|Comments Off on Can a metal roof have concealed gutters?

Choosing an external window sill that sheds rainwater

The choice of an external window sill is determined primarily by the junction detail between the window and the wall, not by colour or material alone. Check whether the profile provides a fall, a projection and a drip edge, and whether it obscures the window drainage openings. The material affects installation and appearance but cannot replace correct detailing. Establish dimensions for the finished, insulated wall and match the solution to the specific window frame and insulation system.

By |2026-11-14T22:55:05+01:002023-09-06|Building guide|Comments Off on Choosing an external window sill that sheds rainwater

Why the point of load application matters for a channel section in a wall rail or frame

Channels are convenient in many construction details. They have an open cross-section, clear fastening surfaces and can be supplied as prefabricated elements. However, their selection should not end with checking the height and weight. The position of the load relative to the cross-section matters. In open cold-formed profiles, the way the force is introduced can affect torsion and stabilisation requirements. A channel arranged as a wall purlin does not necessarily behave the same as a similar element in a frame. The supports, force directions and connections change. The length of the segment without additional restraint of movement is also important. The selection result always refers to a specific structural scheme.

By |2026-11-15T03:03:59+01:002023-08-30|Building guide|Comments Off on Why the point of load application matters for a channel section in a wall rail or frame

Continuous, airtight insulation for a loft conversion

A continuous thermal layer and moisture control matter more than merely filling the space between rafters. Before choosing an assembly, check the condition of the covering, the timber and the layers beneath the metal sheet, and mark out the insulation route across the slopes, ceiling and walls. PIR boards reduce thickness but must belong to the correct assembly, and every detail and joint needs checking. Also consider the available height and ventilation, as these factors determine the choice of material and the sequence of layers.

By |2026-11-15T03:02:18+01:002023-08-13|Building guide|Comments Off on Continuous, airtight insulation for a loft conversion

Roof pitch, water run-off and the choice of covering

The choice of roofing is determined not only by the roof pitch but also by how water drains and how sheets are joined. Before buying, check the permissible slope for the specific product and roof layout, and distinguish degrees from percentages. Pay attention to lap lengths, sealing and drainage, especially on shallower slopes. Remember that the material name alone does not guarantee the performance of the whole system — installation instructions and execution details are key.

By |2026-11-15T03:00:29+01:002023-08-05|Building guide|Comments Off on Roof pitch, water run-off and the choice of covering

Specifying SOPREMA EFYOS BLUE A: properties, edges and applications

The BLUE A design specification gives only the name and thickness. The edge variant and a reference to the parapet detail are missing. The specification should allow the delivery to be checked without having to guess the author's intention. Otherwise, two different boards may be treated as the same procurement item. The EFYOS BLUE A specification should identify the function that the thermal insulation of the flat roof beneath the waterproofing is to perform. The termination of the thermal insulation at the parapet is an element requiring an unambiguous description. The input data should include the height of the parapet above the target covering surface, not only the area intended for thermal insulation. The parapet section with the levels of all layers remains the coordinating document.

By |2026-11-16T00:52:42+01:002023-07-27|Building guide|Comments Off on Specifying SOPREMA EFYOS BLUE A: properties, edges and applications

When does a roof need ventilation tiles and where do they go?

A ventilation tile is needed wherever the design calls for assisted air exchange beneath the covering, particularly around a chimney or roof window. The building owner and the trade should first establish where air enters at the eaves and is meant to leave the slope, then check whether obstacles block that flow. The number and arrangement of elements are determined for the whole detail, not copied from a neighbouring property. With metal roofing, accessories matched to the sheet profile are used rather than ceramic or concrete tiles.

By |2026-11-14T22:53:46+01:002023-07-24|Building guide|Comments Off on When does a roof need ventilation tiles and where do they go?

When do 40 mm second-grade roof panels offer a saving?

A 40 mm second-grade insulated roof panel can be economical only if it meets the project requirements and has a known condition. Check the core, sheets, profile, locks and batch documents, and confirm the load capacity for the actual support spacing and the slope conditions. A thickness of 40 mm alone does not guarantee insulation performance or universal application. Add waste, repairs and installation to the price; the saving disappears when the covering has to be rebuilt.

By |2026-11-14T16:06:16+01:002023-07-14|Building guide|Comments Off on When do 40 mm second-grade roof panels offer a saving?

Concealed gutters: where they fit and what they require

A concealed gutter makes sense above all where you want to reduce the visibility of drainage elements in the building's form. It is worth checking in advance how the water path will run, where access for inspection is planned, and what will happen if the outlet becomes blocked. The decision is best taken at design stage, before the roof and wall layers are built. Concealing the gutter alone does not change the amount of water flowing off, and shape and enclosure are separate matters. The final choice rests with the designer.

By |2026-11-14T19:19:51+01:002023-07-08|Building guide|Comments Off on Concealed gutters: where they fit and what they require
Back to top