About PiVi

This author has not yet filled in any details.
So far PiVi has created 1503 blog entries.

Metal roof installation costs: how to compare labour quotes

To compare roofing labour, first establish whether the rate refers to roof area rather than the home's usable floor area, and ask for the work to be broken down into covering, battens and flashings. Send every contractor the same scope: plan, sections, roof dimensions, covering type, number of chimneys and windows, and access for installation. Check how openings, valleys and eaves are settled, because a price per metre without a description can mislead. For renovation, add dismantling and waste disposal. Compare net or gross offers against one shared list of tasks.

By |2026-11-14T16:08:48+01:002024-11-12|Building guide|Comments Off on Metal roof installation costs: how to compare labour quotes

How do you match the thickness of an insulated panel to the building’s requirements?

The thickness of an insulated panel is selected to suit thermal performance, loads and building requirements at the same time. The information 'heated hall' alone is not enough. You need the core type, the support arrangement, the facings, the operating conditions and the fire requirements. A thicker panel can improve insulation, but it does not solve every problem. The selection should be based on the documentation for the specific product and the entire building envelope. Define the function of the rooms and the operating temperature. Note whether the building will be heated continuously, periodically or not at all. In a cold store the conditions are different from those in a workshop or a warehouse for dry materials. Humidity and the environment on both sides of the panel also matter. Then separate the walls and the roof.

By |2026-11-14T12:15:50+01:002024-11-11|Building guide|Comments Off on How do you match the thickness of an insulated panel to the building’s requirements?

Can T18 profiled steel sheet be used as an eaves soffit?

T18 trapezoidal sheet may work as a soffit finish, but only after checking that the profile, supports and coating suit this use. Above all, assess the direction in which the trapezoid runs, how the sheet is fixed to the substructure, and whether the roof layout requires an air inlet that must be kept open. A sample mounted in the intended direction also shows whether the rib pattern will look too strong across a narrow strip. Decide on the material together with the gutter, flashings and under-sheet layers, because appearance must work with ventilation and drainage.

By |2026-11-14T22:53:18+01:002024-11-10|Building guide|Comments Off on Can T18 profiled steel sheet be used as an eaves soffit?

Winter roof preparation and what to do when snow builds up

Before winter, decide who will assess the roof after heavy snowfall and by what criteria. Measuring snow depth alone is not enough, because weight, distribution and the load capacity of the structure all matter. The building owner should also check that drainage is clear, that snow guards are sound and that any elements which have already worked loose are inspected. Repairs must suit the type of covering and the conditions in which materials are applied, and checks should be planned well ahead so that parts can be ordered. Below we discuss these choices and the trade-offs involved.

By |2026-11-15T03:01:59+01:002024-11-07|Building guide|Comments Off on Winter roof preparation and what to do when snow builds up

Protecting starter profiles and the base of the cladding from moisture

The lower part of the wall operates under different conditions than its upper sections. Splash water, dirt and moisture from the immediate surroundings reach it. Starter profiles and plinth flashings must be selected with this zone in mind. Using galvanised steel sheet alone does not solve all the problems. The position of the components, the seals and the absence of places where water unintentionally accumulates are also important. Before choosing the material, it is worth examining the surroundings of the wall. Ground surfacing, drainage and the way the building is used can all matter. Different dirt occurs on a quiet façade, different dirt at an intensively used gate. Not every situation should be reduced to the same sheet metal designation.

By |2026-11-15T03:03:34+01:002024-11-02|Building guide|Comments Off on Protecting starter profiles and the base of the cladding from moisture

The top line of a metal picket fence: straight, curved or stepped?

The appearance of the top edge of a fence comes down to two decisions. The first concerns how an individual picket is finished. The second concerns the length and position of all the elements within a bay. Rounded ends do not automatically mean the whole fence is arched. Metal pickets of equal length can have level tops even if each end has a gentle curve. It is worth separating these two questions before ordering. Make two sketches of the same bay, changing only one element. First compare the ends at equal height, then check how the outline changes. That way you will see more easily which decision really gives the fence the character you want. This makes it easier to achieve the intended effect and prevents mistakes during production.

By |2026-11-15T17:54:48+01:002024-10-23|Building guide|Comments Off on The top line of a metal picket fence: straight, curved or stepped?

Which roof coverings put the least weight on the structure?

The covering that places the least load on the structure is the one with the lowest mass per square metre of finished roof surface, not per individual sheet. When choosing, check whether the stated value refers to the covering area and what purlins and additional layers are required. It is also necessary to establish where these loads act and how they reach the walls. A comparison made for the same roof area avoids a misleading impression of lightness. Final design decisions remain with the structural designer.

By |2026-11-14T22:54:22+01:002024-10-22|Building guide|Comments Off on Which roof coverings put the least weight on the structure?

Metal fence pickets: how they work and when to choose them

Metal fence pickets are profiled infill elements for fence bays, available in various widths and profile depths. Before buying, check whether the chosen profile suits the existing structure and the desired gap, not just the façade colour. By examining a real sample, you can assess the surface on the street and garden sides and the finish of the edges. Bear in mind that a similar front appearance does not guarantee identical installation requirements. The decision on a double-sided layout or denser spacing should account for wind loads and fixing to the rails.

By |2026-11-14T19:22:27+01:002024-10-19|Building guide|Comments Off on Metal fence pickets: how they work and when to choose them

Choosing wall sandwich panels for the façade finish you want

First decide whether the panel is also to serve as the finished surface on the inside, as this determines the choice of both faces. Then check whether the chosen surface profile and panel layout suit the building's form, and whether visible or concealed fixing matches the intended facade rhythm. Compare PIR and mineral wool cores for insulation, reaction to fire and acoustics, bearing in mind that the parameters relate to a specific product and the whole assembly. A dark colour may require a different colour group and affect span. Include trims, corners and seals in the quotation.

By |2026-11-14T22:52:06+01:002024-10-13|Building guide|Comments Off on Choosing wall sandwich panels for the façade finish you want

What distinguishes a roof sandwich panel from a wall panel?

Roof and façade sandwich panels are not interchangeable, as they differ in purpose, profile, joint and fixing. When choosing, check above all the product data sheet, the cross-section drawing and the installation instructions for the specific application. The roof must carry the design loads and drain water, while the façade must perform under wind action and have sealed joints. The appearance of the sheet alone does not determine the application – the product designation and the scope given in the documentation do. Compare parameters only for the correct function, because a similar core and nominal thickness do not guarantee the same properties.

By |2026-11-14T16:06:34+01:002024-10-07|Building guide|Comments Off on What distinguishes a roof sandwich panel from a wall panel?
Back to top