+48 500 409 109

About PiVi

This author has not yet filled in any details.
So far PiVi has created 1403 blog entries.

Choosing an in-stock steel building to suit the cladding and intended use

Buying a typical structure can bring order to the start of an investment. The bay layout and range of available dimensions are known straight away. A steel hall still needs to be matched to the plot and the planned use, however. We offer our steel structures in ready-made series. Availability from an existing batch and the lead time for the chosen variant are confirmed before ordering. Before choosing the width, it is worth drawing out the machines, racking and traffic routes. A steel hall for production needs space for servicing workstations, while a warehouse needs space for receiving and dispatching goods. In an agricultural building, the dimensions of machinery or the method of storing agricultural produce must be taken into account. A layout prepared in this way shows which module will actually be useful.

By |2026-11-15T03:03:15+01:002026-07-25|Building guide|Comments Off on Choosing an in-stock steel building to suit the cladding and intended use
Read More

Six advantages of metal picket fencing

Metal pickets let you adapt the rhythm, colour and degree of screening of a fence to your own needs. However, it is worth checking not only the advantages of the pickets but also the structure of the bays, the fixings and the intended use of the specific system. Buying the pickets alone does not include posts, rails, a gate or installation. Before deciding, draw the layout along the entire fence length and assess whether the chosen arrangement provides the expected screening and coating durability.

By |2026-11-14T19:20:12+01:002026-07-25|Building guide|Comments Off on Six advantages of metal picket fencing
Read More

Insulating the wall-to-floor junction in a steel building

The bottom edge of the wall is often hidden behind flashings and warehouse equipment. This is exactly where layers with different functions meet. A steel hall needs more than just an aesthetic finish at this point. Thermal protection, protection against water and proper support of the building envelope must be combined. A single random strip of sheet metal will not solve these issues. The foundation transfers the loads of the structure to the ground. The floor slab carries the loads resulting from use and has its own design assumptions. These elements may be connected to each other, but they are not interchangeable. In a steel hall, it must be established where the wall is supported and how its position relates to the level of the finished floor.

By |2026-11-15T03:03:00+01:002026-07-14|Building guide|Comments Off on Insulating the wall-to-floor junction in a steel building
Read More

When does a roof made of insulated panels need additional insulation?

A well-chosen roof made of insulated panels already has an insulating layer in its core and as a rule requires no additional insulation. The need for changes arises during thermal modernisation, a change of use, or when the existing system's parameters are insufficient. First, the condition of the roof and the source of the problem must be checked. Adding material without assessing moisture, loads and tightness can bring new problems. A cold spot under the roof does not always mean the core is too thin. The cause may be a leaky ridge, an improperly compressed joint, missing insulation at the wall, or moisture from a leak. Each of these problems requires a different repair. Adding insulation over the entire surface may only mask the symptoms.

By |2026-11-14T12:18:02+01:002026-07-08|Building guide|Comments Off on When does a roof made of insulated panels need additional insulation?
Read More

Which insulated sandwich panels can be used in a residential house?

Insulated sandwich panels can form part of a house's walls or roof if the entire system has been designed for that purpose. They do not automatically replace the structure or all the layers needed in a dwelling. Besides thermal insulation, acoustics, fire, airtightness, details and finishes must be checked. Selecting a panel for a house requires a broader assessment than choosing lightweight cladding for a warehouse. Most often it is cladding fixed to a suitable structure. Metal facings and a bonded core form a panel with specific properties. It should not be equated with any structural panel or with a PIR insulation board in thin foil alone. These are different products. The design must specify which elements carry the building loads.

By |2026-11-14T12:17:56+01:002026-07-06|Building guide|Comments Off on Which insulated sandwich panels can be used in a residential house?
Read More

Is a thin insulated panel with mineral wool sufficient for a wall?

A thin panel with mineral wool may be suitable for the chosen wall, but its suitability must be verified in the project. A thickness of 60 mm does not provide the same thermal and fire performance as 100 or 200 mm. Nor can it be assumed that this is the smallest thickness available in every system. First establish the function of the partition and the requirements. Only then assess whether saving on thickness will not force changes to the entire solution. The term “thin” depends on the application. A 60 mm panel may be available in a given series, but not necessarily in every joint and finish. Dimensions and the thickness range must be checked in the current data sheet.

By |2026-11-14T09:55:02+01:002026-07-05|Building guide|Comments Off on Is a thin insulated panel with mineral wool sufficient for a wall?
Read More

Insulating a loft to limit thermal bridging and moisture

The decisive question is whether the loft will be used as living space or remains unheated – this determines where the insulation boundary should run. Readers should check the continuity of the thermal layer, how PIR boards are fixed, and the airtightness of junctions at the wall plate and windows. The article helps compare insulation between and above the rafters, and the role of lambda, fire, acoustics and moisture removal. If conversion is planned, the future layout must be considered to avoid paying for a solution that later needs rebuilding.

By |2026-11-14T19:22:23+01:002026-07-03|Building guide|Comments Off on Insulating a loft to limit thermal bridging and moisture
Read More

Which building technologies can reduce costs on a modern project?

The choice of technology depends above all on matching the goal of a specific building, not on the novelty of the product itself. Check whether prefabrication, sandwich panels or the selected insulation actually solve the stated problem rather than adding cost. Before ordering, define the aim, such as a thinner roof or fewer wet trades, and compare options against the same requirements. Verify thermal parameters, span, fire properties and the method of installation. Often a greater change comes from better-prepared details than from an unfamiliar covering.

By |2026-11-14T16:08:20+01:002026-07-01|Building guide|Comments Off on Which building technologies can reduce costs on a modern project?
Read More

When does sheet metal make sense for a façade?

Metal cladding on a façade is worth considering if you want a durable and distinctive finish with low cladding weight. Before deciding, check that the design covers the supporting frame, drainage and connections, and that the cladding itself is not expected to replace wall insulation. Compare profiles and the way sheets are joined, as well as whether cladding could be used on just a selected part of the façade. Remember that the final selection is for the designer to make.

By |2026-11-14T19:21:21+01:002026-06-30|Building guide|Comments Off on When does sheet metal make sense for a façade?
Read More

Keeping differently oriented solar roof slopes visually consistent

Roof slopes facing different directions do not need to have the same number of modules for the roof to look consistent. An integrated steel system allows active fields to be combined with passive cladding. This means the choice of energy-producing surface can be based on solar exposure and the home's needs. The architecture retains a shared rhythm. It is worth designing the whole from the outset, however, rather than selecting the appearance of each side of the building separately. Orientation, pitch and shading affect the amount of light reaching the surface. The time of production during the day also differs. Therefore, two sides of a house with a similar area do not need to have the same energy value. They should be assessed separately and the results then combined into the design of the whole installation.

By |2026-11-15T17:56:01+01:002026-06-30|Building guide|Comments Off on Keeping differently oriented solar roof slopes visually consistent
Read More
Back to top