Choose a material

Roofing sheets

Sandwich panels

PIR insulation boards

XPS

Accessories

Fencing

Six advantages of metal picket fencing

Façades and fences

In brief

Metal pickets let you adapt the rhythm, colour and degree of screening of a fence to your own needs. However, it is worth checking not only the advantages of the pickets but also the structure of the bays, the fixings and the intended use of the specific system. Buying the pickets alone does not include posts, rails, a gate or installation. Before deciding, draw the layout along the entire fence length and assess whether the chosen arrangement provides the expected screening and coating durability.

Fence made of vertical metal bars in front of a house

First advantage: freedom of fence rhythm

The pickets can be arranged to suit the width of the bays and the character of the house. Different profiles and end shapes produce a different effect. Available solutions may provide for a vertical or horizontal layout, but the intended use of the specific system must be checked. Not every product is installed in the same way.

It is worth drawing out the division over the entire length of the fence. The gate, the pedestrian gate and the corners often have different dimensions from the repeating bay. It is good to avoid an accidental, very narrow gap at the end. An even rhythm results from calculating the width of the elements and the spacings in advance.

Second advantage: adjustable gaps

The spacing of the pickets affects visibility and the amount of light passing through the fence. A compromise can therefore be sought between screening and an open appearance. In some systems, an arrangement on both sides of the rails is used. Its effect must also be assessed at an angle, not only straight on.

An openwork fence is not automatically a fully private screen. Smaller gaps also do not exempt from assessing the wind load. The construction of the posts, rails and connections must correspond to the chosen layout. Changing the spacing after the design can change the working conditions of the bay.

Third advantage: factory surface finish

The pickets can have a ready-made coating in a chosen colour or pattern. This allows them to be matched to the roof, joinery and other elements of the property. Before purchase, it is worth viewing a sample from both sides. Single-sided and double-sided finishing does not mean the same appearance from the street and from the garden.

The type of coating should correspond to the ambient conditions. Colour alone does not describe the corrosion protection. Care must also be taken with cutting and installation without unnecessary damage. A scratch or an overheated edge can worsen the effect, even if the remaining surface looks good.

Fourth advantage: different maintenance needs than wood

A metal picket does not require wood impregnation or renewal of its protective treatment. This does not, however, mean a completely maintenance-free fence. Inspections, cleaning and assessment of coating damage are needed. Areas exposed to impacts and contact with dirt require particular attention.

Cleaning agents compatible with the product finish are used for washing. Stiff brushes and aggressive preparations can damage the surface. If corrosion or a deep scratch appears, the repair method must be matched to the coating. Incidental paint of a similar shade does not always ensure the correct technical and aesthetic effect.

View metal fence pickets and get a free quote from SteelProfil

Fifth advantage: convenient installation planning with individual elements

Individual pickets allow the work to be divided into repeatable stages. After preparing the structure, the spacing and alignment of successive parts can be checked. This makes it easier to achieve a neat pattern if the bays are equal. It will not, however, fix badly set posts or incorrectly aligned rails.

The number and type of fastenings are selected according to the system and the structure. There is no single number of screws suitable for every arrangement. The length of the pickets, their position and the load conditions matter. The cost estimate must include not only the infill elements but also the supports, connectors and substrate preparation.

Sixth advantage: the ability to repair a selected section

If a single picket is damaged, replacement of a limited part of the infill can be considered. The method of execution depends on the availability of fastenings and the construction of the bay. It is worth knowing these conditions before purchase. Not every case requires dismantling the entire fence, but not every case can be repaired in one move.

Keep the designation of the profile, length, coating and colour. A new element may differ in shade from the others over time. This is particularly visible on sun-exposed surfaces. Documentation makes it easier to select the correct replacement and to assess what scope of repair will give an acceptable appearance.

How do you calculate the complete set and check the limitations?

Start with the dimensions of the bays between the posts and the planned gap. The width of the picket together with the gap forms a repeatable spacing module. The target layout must account for both edge gaps. It is not worth rounding the number of elements without checking how the remaining width will be distributed.

Add posts, rails, foundations, fastenings, the gate and the pedestrian gate to the quote. Check the view from both sides and the maintenance conditions. Metal pickets have many practical advantages if they are selected as part of a complete fence. The quality of the result is also determined by the construction and the accuracy of planning each bay.

7 branches. Materials closer to your project.

Izoprofil.eu map of seven branches offering sandwich panels, PIR boards and sheet metal
  • SEROCK — Dzierżenin 34 E [mapa]
  • BŁONIE — ul. Sochaczewska 138A [mapa]
  • RADOM — ul. Grobickiego 8 [mapa]
  • ŁÓDŹ — Natolin 8 [mapa]
  • OLSZTYN — Barczewo, ul. Prosta 9 [mapa]
  • WROCŁAW — ul. Jerzmanowska 10C [mapa]
  • GORZÓW WLKP. — ul. Zielona 33/34 [mapa]

Check prices and availability: +48 500 409 109

Free quote