About PiVi

This author has not yet filled in any details.
So far PiVi has created 1503 blog entries.

How should the structure be prepared for insulated wall panels with a mineral wool core?

The structure for insulated wall panels with a mineral wool core should provide proper support, transfer of loads and a level mounting surface. It is not enough to set a few purlins at approximate spacings. The weight of the panels with a mineral wool core, wind, vertical or horizontal layout and openings must be taken into account. Checking the structure before material delivery helps avoid misaligned joints, makeshift packers and unnecessary cutting. A self-supporting panel transfers the anticipated loads between supports. This does not mean it replaces the main hall structure. Columns, purlins, bracing and connections form a separate system. Their stiffness and displacements affect the performance of the cladding. The panel should not be used to straighten or stabilise a poorly prepared frame.

By |2026-11-14T09:54:46+01:002024-07-30|Building guide|Comments Off on How should the structure be prepared for insulated wall panels with a mineral wool core?

How is an insulated sandwich panel constructed and what does it provide in a finished building?

An insulated sandwich panel combines outer facings with an insulating core. The layers are bonded and act together, so the product cannot be assessed solely by the type of foam or mineral wool. In a finished building, the panels form the walls or roof and restrict heat flow. The effect also depends on the joints, fasteners, supports and flashings. A good panel alone will not remedy a leaky joint or incorrect installation. A typical insulated sandwich panel contains two metal facings and a core bonded to them across the entire surface. This arrangement provides greater rigidity than a set of loose, unbonded layers. The facings and core together carry loads within the range specified for the product.

By |2026-11-14T12:17:00+01:002024-07-29|Building guide|Comments Off on How is an insulated sandwich panel constructed and what does it provide in a finished building?

What do lambda and U mean for insulated wall panels with a mineral wool core?

Lambda describes heat conduction through the core material. The U-value indicates how heat penetrates through the panel or the entire building element under specified conditions. These are different quantities with different units. A low lambda is not sufficient to assess a wall. Thickness, joints, fixings and details also matter. Quotes are best compared on the basis of U-values for an identically defined solution. Lambda, written as λ, defines the thermal conductivity of a material. Its unit is W/(m·K). At the same thickness, a lower value means greater thermal resistance of the layer. However, it does not describe the complete wall with connections and structure. It applies to the material under the conditions adopted when determining the properties.

By |2026-11-14T09:54:42+01:002024-07-14|Building guide|Comments Off on What do lambda and U mean for insulated wall panels with a mineral wool core?

SOPREMA EFIGREEN ITE: requirements for façade design

In an ITE design, a note stating that a tongue-and-groove board is used does not on its own describe how the façade is fixed. A substrate, a supporting substructure, a cladding and details at openings are all required. The CS and reaction-to-fire data must be kept within their proper scope. They do not on their own determine the load-bearing capacity or the class of the entire wall. The EFIGREEN ITE specification should identify the function that the external thermal insulation of the wall with façade cladding is to perform. The element requiring an unambiguous description is the external window reveal and the adjacent façade bracket. The input data should include the width of the reveal and the route of the fixings through the thermal insulation layer, and not only the area intended for thermal insulation.

By |2026-11-16T00:52:47+01:002024-07-13|Building guide|Comments Off on SOPREMA EFIGREEN ITE: requirements for façade design

How to give a metal roof a fresh finish

First establish whether the roof is dirty or its coating is ageing — this determines the scope of any refresh. Clean a small area gently and check whether an even colour returns; if it does, deposit rather than coating wear may be the main problem. Also inspect gutters, flashings and fixings, since stains can come from chimney grime or rusting swarf. Only then compare cleaning and local repairs with full painting or sheet replacement, bearing in mind access and safety costs.

By |2026-11-14T19:20:55+01:002024-07-10|Building guide|Comments Off on How to give a metal roof a fresh finish

What to check before ordering insulated roof panels

Before buying a sandwich roof panel, first establish whether the chosen product is actually intended for a roof rather than merely having a similar core. Check the designation, documentation and scope of application, because a wall panel has a different geometry and different joints. Compare load-bearing capacity, thermal and fire performance for the specific support arrangement, not for thickness alone. Also consider slope, length, fixings and the complete set of trims. Only such a set of data allows you to judge whether the panel suits the building and the installation conditions.

By |2026-11-14T22:54:02+01:002024-07-09|Building guide|Comments Off on What to check before ordering insulated roof panels

Metal fence pickets for a traditional home: preserving a harmonious appearance

A traditional house does not need a wooden fence to keep a coherent appearance. Metal fence pickets with the right profile, colour and top detail can work well with brick, render and timber features. It is worth avoiding a random mix of many ornaments, however. The calm character is decided by the proportions and rhythm of the whole frontage. Coated steel sheet gives a ready-made finish, but it remains a different material from timber. It is better to make use of its own qualities than to hide them behind an excess of decoration. The rhythm of the windows, the roof colour or a simple entrance detail can serve as a reference point. Not all of these elements need to be repeated in the fence. Choose one relationship that will read clearly from the street. With a façade that has many textures, a calm infill often helps to bring order to the view. With a simpler house, a slightly more pronounced picket top can act as an accent.

By |2026-11-15T17:54:51+01:002024-07-09|Building guide|Comments Off on Metal fence pickets for a traditional home: preserving a harmonious appearance

Minimalist photovoltaic roofing: planning the details carefully

A minimalist photovoltaic roof needs a carefully considered detail plan, because on a calm roof surface every arbitrary decision is visible. An integrated steel system provides a good starting point: the cells and the covering form a single assembly without a separate structure above the roof. However, the quality of the result is determined by the edges, the penetrations and the rhythm of the arrays. A simple form does not consist in removing the necessary elements, but in arranging them so that the whole is clear and functional. In a complex composition, a minor difference may remain less noticeable. On a simple, dark roof surface, attention focuses on a few lines. An uneven eaves line, an arbitrary flashing or a poorly positioned vent outlet easily disturb the impression of order.

By |2026-11-15T17:56:05+01:002024-07-07|Building guide|Comments Off on Minimalist photovoltaic roofing: planning the details carefully

Planning factory ventilation starts with locating the sources of pollution

A large fan is not a ready-made solution to the problem of dust, steam or excess heat. First you need to establish what is generated during operation and where it enters the air. A steel hall may have different emission zones, even if it houses a single production line. The ventilation design should follow from this picture, not from the building volume alone. Information is needed on the substances, their quantities and the way they are released. The number of machines in operation and their running time are important. A steel hall with metalworking has different needs from assembly, packing or a wet process. These differences affect the method of capturing contaminants and the selection of the installation.

By |2026-11-15T03:02:55+01:002024-07-06|Building guide|Comments Off on Planning factory ventilation starts with locating the sources of pollution

Why does water appear on insulated sandwich panels and how can condensation be limited?

Droplets on an insulated sandwich panel do not necessarily mean a leak. Water can form from the vapour contained in the air when the facing or the detail is sufficiently cold. The cause is sometimes high humidity, a thermal bridge or a non-tight joint. Before you seal the roof or add a membrane, establish the source of the water. Repairing the interlock will not replace ventilation, and intensive ventilation will not remove a wrongly executed roof penetration. Note when the water appears. A leak is usually connected with rain, melting snow or a specific wind direction. Condensation can also occur during dry weather. It often appears when the enclosure cools down and the humidity in the hall is high.

By |2026-11-14T09:54:40+01:002024-06-27|Building guide|Comments Off on Why does water appear on insulated sandwich panels and how can condensation be limited?
Back to top