Building handbook2026-11-15T17:53:55+01:00

Choose a product group

Metal roofing

Sandwich panels

PIR insulation boards

XPS

Accessories

Fencing

Building handbook

The Izoprofil.eu handbook covers roofing, wall cladding and insulation, from reading specifications to preparing an order. Find guidance on sandwich panels, PIR boards, trapezoidal sheets and metal roof tiles. Understand overall sheet width and effective cover width, compare insulation options and plan installation details. The articles also cover renovation, material storage and costs that are easy to overlook. Worked examples explain the calculation method. Check the design and product documentation before making the final selection. Once you have identified the material, prepare the dimensions, quantity and delivery location for a quote.

Can trapezoidal steel roofing suit a traditional house?

Trapezoidal sheet metal can suit a traditional-style house if its profile, colour and details work with the building form and surroundings. Rather than following a generic recommendation, assess the whole composition: roof proportions, eaves, chimney and façade materials. Check whether the chosen variant disrupts the existing arrangement and whether its technical parameters match the structure and pitch. Compare samples under different lighting conditions and analyse the details at the roof edges. The decision should come from fitting the specific building, not from the name of the covering alone.

PIR roof panel or EPS-core panel? How to compare the options

A PIR roof panel usually achieves better thermal insulation at a smaller thickness than a comparable EPS-core panel. The polystyrene variant can be cost-effective and lightweight. However, the choice should be governed by the requirements of the entire roof. U-value, loads, the range of fire classifications, coatings and installation cost must be compared. The same thickness does not mean the same thermal function. An insulated roof panel has metal facings and a bonded core. Its price should not be compared directly with a PIR insulation board alone or a pack of EPS. These materials require other layers to form a roof. In both panel variants, the outer profile and the joints are part of the roofing system.

Roofs without overhanging eaves: what to plan before building

A roof without eaves is one where the edge of the slope sits close to or flush with the façade rather than projecting beyond it. Before building, it is worth establishing how water will drain away and where the service points will be. Check the junction detail between roof and wall, the continuity of insulation, and access to the gutter and downpipe. Whether the gutter stays visible or is concealed depends on the chosen detail. Also remember ventilation and the coordination of roofing, insulation and façade work.

T18 trapezoidal steel sheets: dimensions and support spacing

T18 trapezoidal steel sheet is suitable for many roofs and façades, but the profile name alone is not enough to place an order. You need to check the cover width, steel thickness and sheet variant. The support spacing depends on the loads and the tables for the specific product. Two sheets marked T18 may have a different width, a different cross-section and different installation conditions. Below we show how to read this data and use it when taking measurements. The number in the name refers to the nominal height of the rib. It does not describe the steel thickness, sheet length or cover width. T18 from two different production lines does not have to have identical ribs.

Planning integrated photovoltaics for a hipped roof

A hipped roof can be combined with integrated photovoltaics, but its shape requires careful planning. Triangular and trapezoidal slopes cannot accommodate rectangular modules in the same way as a large gable roof. In steel BIPV, active zones can be combined with passive cladding. This allows a consistent appearance to be maintained even at the edges. However, the design should be based on the actual dimensions, orientations and energy requirements of the house. Each slope tapers in a specific way, and the corners form long diagonal lines. The area measured in square metres does not show how many full active modules can be accommodated. It is worth preparing a separate drawing for each side.

What is a 100 mm mineral wool insulated wall panel suitable for?

A 100 mm wall panel with a mineral wool core can be used for cladding halls and selected internal partitions. However, it is not a universal solution for every heated building. Its U-value, mass, acoustics and fire resistance depend on the specific system. Before purchase, the support, coating and locks must also be checked. The same thickness in two offers does not mean the same properties. In one of the wall panels with 100 kg/m³ stone wool, the 100 mm variant has a Uc of 0.39 W/(m²·K). With 0.5/0.5 mm facings, the mass is 18.1 kg/m². The datasheet states Rw 33 dB and a reaction to fire of A2-s1,d0.

Back to top